Tribological properties of Heng Xu pin on disc friction and wear tester

What kind of friction and wear performance indexes can be tested specifically by the MPX pin disc friction and wear tester specializing in the production of Heng Xu? This is not only a doubt for many customers, but also a knowledge that new colleagues need to learn. It is also an important reference for selection. Then, hang Xu Xiaobian is going to study with everyone.

Heng Xu's pin on disc friction and wear tester can test the following two aspects:

1, friction coefficient

Friction coefficient refers to friction force / test force. The friction mentioned here is not directly displayed on the software of the measurement and control system of Heng Xu. It is calculated by the friction torque / radius of the sample. Of course, this calculation is automatically calculated by the software. The test force is the force acting on the pin of the pin. Therefore, as long as the parameters are set before the test, the software will automatically show the friction coefficient on the interface. As for the setting of the parameters, we can set up the test force, test speed, friction torque, test rotation, test time and so on in the special measurement and control system of Heng Xu, which is programmed by the software design engineer of the Department of technology.

2. Wear amount

This is very simple. As long as the weight of the pin is weighed before the test is weighed, the same sample is weighed after the test, and the weight of the test is subtracted from the weight before the test, and the amount of wear can be obtained.

According to the materials that customers want to test, they can also set different time. The pin and disc friction and wear testing machine produced by Heng Xu is very good for testing the properties of metal materials, and it is very suitable for constant grinding. If you are more interested in our disc friction and wear tester, you are welcome to inquire.