YDW-10Microcomputer controlled electronic bending and compression testing machine
Brief introduction：1. Product Description:YDW-10 Microcomputer Controlled Electronic Anti-ben
1. Product Description:
YDW-10 Microcomputer Controlled Electronic Anti-bending and Anti-compression Testing Machine is the latest product of our company. Stepper motor is used as power source to drive precision ball screw for loading. EBC-70 Microcomputer Color Screen Controller is used for automatic control of the machine. It has the advantages of simple structure, low noise, energy saving, environmental protection and simple operation. Point. It is mainly used for testing the flexural strength of cement, red brick, refractory brick and other materials. It can be loaded automatically according to the loading speed stipulated by the corresponding national standards. The load, speed, time and test curve can be displayed dynamically in real time during the loading process, and it has the function of maintaining the test force. The test results can be automatically saved after the test. The test results can be querying and printing.
Two. Main technical parameters:
Maximum testing machine：10kN
Force resolution：1/200000
Relative error of indication value：Within the range of 1%-100%, + 1%
Repeatability relative error of test force indication：≤1%
Loading speed range：5-500N/s
Test space (high x wide)：180x165mm
Maximum stroke：40mm
Loading mode：Electric power
Supply voltage must have reliable grounding measures.：～220V±10% 50Hz
power：80W
Three. Quality assurance:
After the formal acceptance of the equipment, the equipment shall be regarded as a formal delivery. The three-package period of the equipment is one year from the date of formal delivery (unless otherwise stipulated by the supplier). During the three-package period, the supplier will provide timely service and maintenance for all kinds of equipment failures. If the equipment out of warranty fails in use, the supplier will serve the orderer in time and actively assist the orderer to complete the maintenance task.
If it's not the type you want, please check the page of the microcomputer controlled pressure tester or call the hotline 0531-85860713.
