Automatic program control oven DGG-9023AD

1. The performance of DGG-9023AD automatic program oven.

1, fully automatic, 30 segment programmable.

2, the highest temperature is 250 degrees, the accuracy is 1 degrees.

3, mirror 304 stainless steel liner, four angle arc, inlet and outlet air volume adjustment.

This automatic programmable oven adopts intelligent LTDE control system, with a precision of 65 Microcomputer intelligent temperature controller, with PID self-tuning function, high temperature control precision, double-layer tempered glass observation window, inlet and outlet air volume adjustment, mirror stainless steel inner liner, with timing control function, laminated glass fiber cotton insulation shell cold plate spray.

Widely used in biochemistry, agricultural research, environmental protection, chemical pharmaceuticals, medical and health care, food, machinery and other research and application fields, as a glass drying, sample thermal denaturation and hardening test, remove residual moisture in the specimen, microbial glass drying and sterilization, heating experiment before the precaution Hardening or softening experiments of food and chemical substances during heating and heating, removing moisture, prolonging the storage time of food under harsh conditions and drying, baking, disinfection, sterilization and denaturation tests of building materials, electronic components and heat-resistant experiments. It is also used for drying and baking various kinds of materials in industrial and mining enterprises.

Two. DGG-9023AD automatic programmed oven details:

1, box structure and materials

1.1 Outer box material: Outer box adopts high-quality cold plate after phosphoric acid coating salt treatment, high-temperature spraying, the color is blue door white body

1.2 studio materials: mirror stainless steel inner liner, movable stainless steel electropolishing shelf, tempered glass window,

1.3 Internal structure: Reasonable duct structure, air circulation design, fan forced circulation, to achieve all-round three-dimensional heating effect, to ensure that the working room has a good temperature uniformity, unique geometric cavity clean design.

1.4 thermal insulation material: high density glass fiber cotton, in front and rear sides of the box, the upper and lower layers are filled with heat insulation.

1.5 Sealing mode: High temperature resistant silicone rubber sealing strip is used in the door and studio to ensure the sealing of the studio. The inner plate of the door is made of stainless steel. A double-layer tempered glass observation window is arranged at the position of the box door, which is transparent and insulated to observe the change of the sample in the box. The back of the box body is provided with an air intake hole and a safety air vent, and the size of the air vent can be adjusted by a panel knob.

1.6 temperature measuring port: PT100 sensor enters from the rear of the box.

1.7 terminal:: the heating element is located at the bottom of the box.

1.8 controller: located on the left side of the box, with built-in control system.

1.9 heating element: stainless steel heater

2, temperature control system and characteristics

Personalized program design, LTDE programmable system, can be preset 30 segments of programmable, to achieve the pre-appointed temperature when running or step-by-step programming operation.

2.1PT100 high-responsiveness thermal sensor and environment scanning microprocessor chip constitute a high-precision, high-intelligence temperature control characteristics.

Built-in temperature corrector can adjust the small error of temperature. When the working temperature deviates from the set temperature, it can alarm automatically. It has automatic power-off protection for heater out of control.

2.2 has power-off recovery function, when the external power supply is restored to supply, the equipment can automatically follow the original set program for fast constant temperature. With parameter memory function, it can avoid tedious settings, automatic stop, timing operation, caller recovery, parameter memory, parameter password protection, temperature display correction.

Set the timing function, the period from 1 minute to 9999 minutes * 30 arbitrary set working time, the end of the timing will close the setting display window.

2.3 Setting parameters and actual parameters can be clearly displayed. LED clearly shows the setting temperature, measured temperature, timing time, the parameters are visible, with modular design of the upper limit of temperature tracking function, when the measured temperature deviates from the allowable range, the instrument sound (light) alarm and automatically cut off heating.

3. Wind circulation system

3.1 the circulating fan is located in the middle of the stainless steel heater in the back of the box.

3.2 Adopt long axis fan motor and multi-silk aluminum alloy blade to achieve horizontal convection-diffusion arc circulation of air in the box, so that the temperature in the box is uniform and stable all the time.

4. Heating system

4.1 stainless steel heater, located in the back of the box, is controlled by the PT100 sensor response system.

4.2 heating power output of heater is automatically controlled by microcomputer in automatic meter.

5, safety protection system

5.1 fusing protector

5.2 over temperature protector, sensor fault alarm and upper limit temperature alarm.

5.3 fan over current protection

6, equipped with technical information and accessories:

6.1 operation manual

6.2 product warranty card

6.3 certificate of qualification

7, after sales service:

7.1 responsible for remote technical guidance to users.

7.2 provide spare parts and accessories in time.

7.3 provide technical advice and support in the process of equipment utilization.

7.4 respond to customer failure notification within 8 working hours.

8, the main components

8.1 automatic control instrument

8.2 solid state relay

8.3PT100 sensor

8.4 cycle motor

8.5 stainless steel heater

Three, product technical parameters

1, temperature range: +10 ~ 250 C at room temperature;

2, Volatility: + 1 C;

3, display accuracy: 1 C;

4, studio size: 300*300*270MM

5. Approximate size: 510*500*440MM

6, heating speed: less than 5 /min;

7, the whole machine power: 500W;

8, power supply: 220V, 50Hz;

Four. Matching equipment that can be used when using automatic programmable oven.

1, energy-saving fiber resistance furnace SX3-1.5-10 price: 4000 yuan (3000 yuan after discount).

2, energy-saving fiber resistance furnace SX3-3-10 price: 6800 yuan (5100 yuan after discount).

3, 600G/0.1G electronic balance price: 800 yuan (480 yuan after discount).

4, 100G/0.01G electronic balance price: 1180 yuan (708 yuan after discount).

5, 100G/0.001G electronic balance price: 4400 yuan (2640 yuan after discount).

6, 200G/0.0001G electronic balance price: 7990 yuan (4794 yuan after discount).

7, the Sarto balance, with the built-in RS232 interface of the hook, weighing 220G, precision 1MG. Price: 6935 yuan (4820 yuan after discount).

Balance is placed on the top of oven or high temperature oven and the sample is hung in oven. The weight of the balance is displayed with the baking of the sample.

8, VD-650 table cleaning workbench (vertical air supply) price: 2700 yuan (1620 yuan after discount).

9, SW-CJ-1D single face purification workbench (vertical air supply) price: 4500 yuan (2700 yuan after discount).

10, SW-CJ-2D double face purification workbench (vertical air supply) price: 9200 yuan (5520 yuan after discount).

11, SW-CJ-1F single side double cleaning workbench (vertical air supply) price: 8800 yuan (5280 yuan after discount).

12, acidity meter PHS-25 (pointer precision + 0.05PH) price: 980 yuan (735 yuan after discount).

13, acidity meter PHS-3C (digital display precision + 0.01PH) price: 2398 yuan (1678 yuan after discount).